s t a r t        k o n t a k t a        
Sågar & kapmaskiner
Bandsåg Pilous ARG 300 Plus H

Ordernummer: 2118
Tillverkare: Pilous
År: 2018
Status: Ny

Pris: 62 000 SEK

Bandsåg med hydraulisk höjning av sågbygeln. Sågar runt 300 mm.
Inkl frekvensstyrd bandhastighet.

ARG 300 plus HF
Exceptionally robust universal band saw is appraised for general use in continuous uninterrupted production plants and in workshops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of materials, including stainless steel or tool steel. Vice system contributes to versatility of use by providing bilateral continuous setting of the cutting angle within the ranges 60° to the right and 45° to the left. The machine is equipped with a simple hydraulic unit which facilitates the automatic uplift of the saw band arm after the cut is finished. In contrast to manual uplift this system makes the operation of the machine much easier, especially when cutting larger series. Uplift height can be adjusted according to the size of the material to be cut. The feed into cut is carried out by the weight of the arm, with the possibility of continuous regulation by the oil damper butterfly valve. When the cutting is finished the band drive automatically switches off and the arm goes up to the set position. Three-phase two-speed motor (400V) allows you to select the speed of 40 or 80 m/min according to characteristics of the material to be cut. Large base and massive arm turning system with large loading surfaces ensure exceptional stability of the machine even when cutting heavy workpieces.
Robust machine framework composes of castings from grey cast iron and therefore ensures vibration absorption.
Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
Simple locking and adjusting of the desired cutting angle on the angle scale with stops fixed at 45°, 60° and 90°.
The turntable rotates along with the saw band. Thanks to that the saw band does not cut into the loading surface of the vice.
Massive quick-clamping vice ensures easy and reliable material clamping.
Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine.
Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
The machine checks correct tension or break of the saw band. If the saw band breaks the machine automatically switches off.
Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
The machine is equipped with a hinged stop with a 500mm scale. Hinged system prevents the workpiece from jamming during cutting.


Intresseanmälan  

Tillbaka







  Säljare
Per Von Wachenfeldt
Tel: +46 705- 73 15 10
per@abkm.se
    Säljare
Anders Weidow
Tel: +46 705 83 15 10
anders@abkm.se
 

Kävlingemöllan AB Timmergatan 11, 276 30 Borrby SWEDEN Org.nr: 556700-6704